38 995,00 kr 48 743,75 kr inkl. moms
Flash memory has become an increasingly common storage medium for distribution and is used in many different types of electronic devices to store and distribute data.
The ADR SD Producer is a fast and efficient standalone duplicator that offers a simple solution for copying SD cards and flash drives. The series is available with anywhere from 7 to 39 target ports to meet a variety of production needs.
Each port has a separate, dedicated channel that supports a bandwidth of up to 33 MB per second.
Whether you’re copying to 1 or 39 SD cards at the same time, the number of destination devices does not affect the copy speed per port.
The intelligent source analysis automatically identifies the areas on the storage medium that contain data and copies only those areas, which streamlines the copying process.
Test conditions:
Source: 2 GB/FAT32
Data size: 119 MB
*Copy speed and copy time vary depending on the performance of the flash memory.
| Number of target units | PC-based duplicator | ADR Duplicator |
|---|---|---|
| 1 unit | 28 sec. | 18 sec. |
| 10 | 3 min. 57 sec. | 18 sec. |
| 20 pcs. | 15 min. 1 sec. | 19 sec. |
| 100 pcs. | – | 19 sec. |
ADR’s flash duplicator operates completely independently of a computer, enabling high and consistent performance even when multiple storage media are being copied simultaneously.
| PC (8 ports) | SD Producer 1–7 | SD Producer 1–15 | SD Producer 1–23 | SD Producer 1–31 | |
|---|---|---|---|---|---|
| Capacity in 10 minutes | 8 pcs. | 56 items | 120 pcs. | 184 items | 248 items |
| Capacity in 1 hour | 48 pcs. | 330 pcs. | 700 units | 1,000 | 1,400 units |
Test Conditions:
| Source: | 900 MB |
| Target device: | SD card with a transfer speed of 12 MB/s |
Based on the above test, an SD duplicator with a large number of ports can offer significantly higher production capacity than the PC-based solution tested. This can lead to significant savings in both production time and labor costs.
After the copy is complete, a bit-by-bit comparison is performed directly in the hardware to verify that the copied data matches the original.
It provides a fast, reliable, and user-friendly solution for copying and verifying data.
During asynchronous copying, the data is automatically loaded into the system’s buffer memory. After that, each port can operate independently and continuously.
This makes it possible to remove a card that has already been copied and insert a new one without having to wait for the other ports to finish.
| Model | SD Producer 1–7 | SD Producer 1–15 | SD Producer 1–23 | SD Producer 1–31 | SD Producer 1–39 |
|---|---|---|---|---|---|
| Master’s Degree: Objectives | 1:7 | 1:15 | 1:23 | 1:31 | 1:39 |
| Operating Mode | Standalone | Standalone | Standalone | Standalone | Standalone |
| Supported media: | USB 1.1 / USB 2.0 / SD / SDHC / microSD / miniSD / CF cards |
| Display: | Monochrome LCD display |
| Controls: | 4 buttons (Up, Down, OK, ESC) |
| LED indicators: | Green/red LED at each port |
| Operating temperature: | 5 °C–45 °C |
| Storage temperature: | –20 °C–85 °C |
| Operating humidity: | 20–80% |
| Storage humidity: | 5–95% |
| Power supply: | 80 W or more, depending on the system model; AC 115–230 V |
| Certifications: | FCC, CE, RoHS |
The information above is intended for marketing purposes. Technical specifications are subject to change without notice.
The number of ports and the type of interfaces (SD/USB/CF/microSD) can be customized and expanded to meet the customer’s needs.
