ADR USB 3.1 Producer 15 targets

The ADR USB 3.1 flash drive duplicator is equipped with the latest technology for high transfer speeds. The product line includes models with between 7 and 47 target ports. The transfer speed is up to 16 GB per minute. No computer or other software is required, which also eliminates the risk of virus infection via a computer.

Since the copy process is performed bit by bit, the risk of incorrect copy results is minimized. With the Copy & Compare feature, you can also verify that the new destination drives are exactly identical to the source drive.

Our duplicators are completely standalone units. Simply connect the system’s power cord and start production.

The unit is controlled via the built-in control panel, which features four buttons and an easy-to-use LCD display.

ADR AG offers free firmware updates for all of our devices. This ensures a high level of compatibility with new memory chips and controllers introduced to the market.

Impressive efficiency

The ADR USB 3.1 Tower Duplicator can copy data at speeds of up to 16 GB per minute (260 MB/s) without requiring a computer. It is specifically designed for USB 3.1 devices, and its high transfer speed enables efficient duplication of large-capacity USB hard drives.

Copy Modes

Quick Copy (Data & System): Support for Windows (NTFS), FAT16/32/64, and Linux (ext2/3/4).
Whole Media: Bit-by-bit copying that creates an exact copy of the master device. Support for all proprietary and unknown formats.

Diagnostic Modes

H2/H5 Test: Checks the quality of the flash memory by reading from and writing to it.
Checking capacity, bad sectors, and read and write speeds.
Detection of USB 3.1/USB 2.0 signals.

3 erasure modes

Quick Erase: Deletes the hard drive’s index table and takes only a few seconds to complete.
Full Erase: Erases the entire hard drive.
DoD Erase: Data erasure in accordance with the U.S. Department of Defense (DoD) standard for data erasure.

Technical specifications

Specifications	ADR1-15USB31
Number of goalposts	1–15
Maximum transfer rate	16 GB/min (260 MB/s). Actual performance depends on the transfer speed of the USB devices and the number of connected USB flash drives/hard drives.
Capacity	Support for the latest capacities on the market. Designed for capacities over 18 TB.
Operating Mode	Standalone, FPGA-based operation (no computer required)
Supported Languages	English or Japanese
LCD display	Backlit monochrome LCD display
LED indicators	2 LED indicators (red/green) per port
Control Panel	4 buttons (▲, ▼, OK, ESC)

Features and functions

Function	Description
Copy Modes	Quick Copy (copying systems and files)
Whole Media Copy	Copying the Entire Media
Compare Function	Bit-by-bit data comparison
H2 Test	Writes to and reads data using H2 files
H5 Test	Writes to and reads data using the system’s standard files
Erasure Modes	Quick Erase, Full Erase, and DoD Erase
Formatting Functions	Formats the drive to FAT16 or FAT32

Compatibility

Specifications	Information
Compatible Devices	USB hard drives, USB 3.1, USB 2.0, and USB 1.1 flash drives
Compatible Devices with Adapter	SD, MicroSD, and CF
Formats for Quick Copy	FAT16/32/64, Windows (NTFS), and Linux (Ext2/Ext3/Ext4)
Whole Media Copy	All formats, including proprietary formats
Operating Systems	All—Windows, Mac, Linux, and other standalone systems

Hardware Specifications

Specifications	Information
Power Supply	80 W or more, depending on the system configuration and requirements
Operating Temperature	5 °C–45 °C (41 °F–113 °F)
Storage temperature	−20 °C–85 °C (−4 °F–185 °F)
Operating Humidity	20–80%
Humidity during storage	5–95%
Certifications	FCC, CE, RoHS